Blackening of silver jewelry is a normal natural phenomenon. Because of sulfur and oxides in air and other natural media, it has a certain corrosive effect on silver. After wearing for a while, some tiny spots (silver sulfide film) will appear. It will spread into pieces and even become black. In these cases, how to clean silver jewelry? Let's learn.
If you find signs of yellowing in the silver, the easiest way is to use a toothpaste and a little water to lightly wash the surface. Brush the toothpaste directly on the silverware, then add a little water to remove the foam. If it is a seam, brush it with a toothbrush to prevent the foam from entering the seam. If it is a stone-matching process, avoid the toothpaste coming into contact with the stone. Finally rinse off, especially where there are seams. Or use a soft brush to clean the slits of the silver jewelry, then wipe the surface with a silver cloth, and immediately restore the original beauty. (If you can use silver cloth to restore about 80% of the silver, you should not use silver and silver, because they are all corrosive, silver jewelry will become more after using these products. It is easy to turn yellow. In addition, the silver cloth contains silver maintenance ingredients and cannot be washed with water.
The silverware is yellow and serious. It should not be too long to be soaked in silver-washed water. It is usually used for a few seconds. Immediately after removal, it should be washed with water and then blotted with tissue paper.
The simple cleaning method for the family is as follows: it can be washed with carbonated drinks, such as soaking in cola for 12 hours, and it is relatively clean after taking out. Baking soda can also be used to clean silver, and it is soaked with overnight tea, the effect is not bad.
Terry Fabric Roll,Terry Cloth Fabric,Yarn Dye Stripe,Cotton Poly Stripe Terry
SHAOXING LINGGE TEXTILE CO., LTD. , https://www.lingertex.com