Five claw fastener installation method

[China Button Trading Network] The five-claw buckle and the four-pronged buckle are composed of four parts, and two of them are the same, that is, two small iron rings with claws. They occupies five claws and engage the other side. fixed. Because the claws of the five-jaw clasp are short, they are not suitable for places that are too thick. However, they are lighter than the four-pronged clasps. In general, children's clothing or thin pouches can be used as fasteners in the summer.

One part of the five-jaw clasp is difficult to distinguish between the front and the back. It cannot be seen at all. If you look closely, the front inner edge is relatively flat, and the back has a groove, which is the face of the flute with the claws. Can only be fixed. This must be observed before installing.

The five-jaw buckle installation tool can be much simpler. First, it does not need punch punches. Sharp claws can be worn directly from the front to the back:

The tool it uses can be used in conjunction with snap fasteners, only one of which can be used with a tapping tool. After putting the other half on the claw, use the same tool to beat the two parts and fix:

rayon jersey fabric

Tr Spandex Fabric,Solid Color Lenzing Fabric,Rayon Fabric,Spandex Fabric Stretch

Zhejiang Shaoxing Yongda Knitting & Art of Work Co., Ltd , https://www.ssfwfabrics.com

Posted on